KC Woodworking Tool Show
- Tyler’s Tool Cabinet 1st Place
This year’s woodworking tool show was again held at the Overland Park International Trade Convention Center January 28-30,2012. The show was fairly well attended and the Lee’s Summit Woodworkers Guild was well represented with many of its members bringing in some of the finest projects for display. In addition to the guild display the Tool Show and Bosch Tools sponsored the “Show Off Project” contest. For the third consecutive year I entered a project for judging by the show’s attendees. The project is of my own design. You can follow the construction updates in previous articles on this website. The first day of the the show was exactly 7 days after I had knee surgery. I greatly appreciate Steven Todd and others for their assistance in hauling and unloading the project for me. Without their help I would not have entered the cabinet in the contest. I’m happy to report that Tyler’s Tool Cabinet came in first place but the competition was tough. I would like to thank those who took the time to vote for their favorite project.
Tyler with his Tool Cabinet
In addition, I would like to thanks those that spent time at the SawStop booth to see the hot dog demo followed by my demonstration on How to Cut Staves for Segmented Bowls. In all, I gave seven demonstrations which were well attended. I was asked by a fellow guild member “what was the best thing about this year’s show?” and without hesitation my response was meeting so many kind people who were appreciative of everyone’s efforts and skills. Much appreciation to Larry Bowden and Industrial Technical Services Incorporated for allowing me to use their SawStop for my demonstrations.
Tommy Mac and Jay Helland
Segmented Bowl Demo
2011 Tool Show 1st Place Winner
The attached photos were taken during this year’s show. Just click on the photo to enlarge it.
Larry Bowden of ITSI
Segmented Bowl Making Demo
Lee's Summit Woodworkers Guild Booth
Design based on James Krenov's cabinet on stand.
Segmented Bowl Demo
Jesus Bowls
My good friend Kyle Gorrell started making segmented bowls a couple of years ago in my shop. He now has his own shop and is creating beautiful objects. The Jesus bowls were Christmas gifts made for his mother and sister. He has one bowl to finish for his collection. I believe there are 107 pieces of wood in each bowl. The other bowls shown were is first segmented bowls. His work is of his own design.
Click on the photo to enlarge.
Tyler’s (Krenov Inspired) Tool Cabinet
Tyler’s (Krenov Inspired) Tool Cabinet
Basics:
Project completed on June 5, 2011
- Constructed for 5 year old grandson
- Casework Material Walnut
- Casework Stand and Exterior Door Frame Material Ash
- Interior Doors and Draw Fronts Material Spalted Maple
- Completion Hours 280
Finally after 280 hours, the final touches have been made to the tool cabinet designed and constructed for my 5 year-old grandson Tyler. The design inspiration for the cabinet was a chest-on-stand design, generally accepted as James Krenov’s style. In addition, as did Krenov, I worked from sketches often making changes as I went. Krenov often worked in this manner and called it ”improvisation or composing”. However, the cabinet is of my own design with elements taken from other tool cabinets I’ve observed. The cabinet will be kept in my possession until Tyler is ready to out on his own (approx. 16 years). I plan to fill it with woodworking hand tools. Some have asked, “what if he doesn’t want to be a woodworker”? If that is the case, he can use it to store other collectibles or use it as an armoire. However, so far he loves working in the shop with his grandpa and I will continue to encourage and foster that attitude at ever opportunity.
The hand cut dovetail drawers were a challenge for me! I’ve cut many multiple dovetail drawers using a router with a typical dovetail jig and fixture. However, this project called for so much more from me. So I purchase Rob Cosman’s DVD on how to make hand cut dovetails and got started. All the joints are of an acceptable quality. It only took me 32 joints to finally have them fit straight from the saw with little or no chiseling. The saw used was a rip-tooth dovetail purchased from Lie Nielson for about $125. What a wonderful tool! The drawers were made from Aspen with 1/4″ maple and recycled cherry plywood bottoms. The bottom drawers were constructed with blind dovetails and the interior drawers have through dovetails with applied drawer fronts. The drawer fronts as well as the interior door panels are made of spalted maple.
The back is solid walnut using frame and panel construction. I know that the new method of keeping raised panels centered in the framed opening is with the use of space balls. I used the old fashion method of pinning the panel with a small brad at the center of each panel at the top and bottom. If you ever decide to use this method, I strongly suggest you drill a small pilot hole to prevent the splitting of wood near the edge of the frame.
The cornice or crown (along with other details) of the cabinet was the source of many discussions with Steven Todd and Scott Barton. I finally settled on a design that almost is exactly what I had sketched months earlier. However, collaboration was essential for me to be satisfied with the final outcome. Many thanks to my good friends!
Two years ago, Tyler gave me a “Special Black Rock”. I promised him that I would keep this rock for the rest of my life. I carried it in my pocket for about a year and then decided that I better keep it in a more secure place. Surprisingly, from time to time Tyler would ask me if I still had the special rock. In telling this story to my friend, Scott Barton, he suggested that I incorporate the rock into this project’s design. Scott called the rock a touch stone. Back in the day, these hard dark colored stones of jasper or basalt were used to test the quality of gold or silver. The term touch stone now represents something of authenticity or high standard.
The drawer pulls were made from rosewood. I generally incorporate a design element into my projects that recognizes the Trinity (Father, Son and Holy Spirit) from which all gifts flow; including woodworking. In this project the bottom drawers have three 1/8″ brass rods installed through each drawer pull from the top to provide additional support and to praise our Lord (Soli Deo Gloria, Glory to God Alone).
Please leave a comment on this project or any articles, PowerPoints or videos you see on this website.
Thanks for taking the time to visit our website!
Alan Lacer’s Woodturning Demo in Kansas City, Missouri
About 20 woodturners attended an excellent seminar by Alan Lacer sponsored by the Northland Woodturners Club on Saturday, April 30, 2011. Alan is an outstanding teacher, demonstrator and accomplished woodworker. He took time to answer all questions thrown at him and gave good empirical answers based on his personal experience. Alan’s skill with the skew would be difficult to match. His PG humor and wit was pleasurable. The topics discussed include metallurgy, finishes, tool selection and skill development through various projects and exercises. One would think that after 8 hours of lecture, demonstration and Q&A you’d be ready to escape to the beautiful sunshine we had that Saturday, but the time seemed to pass quickly. Unfortunately, I was not able to attend the second day of the hands-on seminar.
I can strongly recommend Alan, if you are thinking about attending a woodturning seminar. Great job Alan!
Tyler’s Tool Cabinet Update May 1, 2011
I thought readers would be interested in seeing the latest photos of the tool cabinet I’ve designed and is under construction for my 5 year-old grandson. If he doesn’t become a woodworker, it can be used as an armoire. I have almost 200 hours in construction. This is my first attempt to make hand-cut dovetails. The cabinet has a total of 12 drawers and I have only 4 completed. I’m happy to report that the fourth drawer turned out better than the first with regards to joint fit. All the joints are functional but not as attractive as they could be. Practice, practice and more practice is needed. I’m following Rob Cossman’s technique for making the joint.
The basic design is a chest-on-stand (James Krenvon inspired) with a touch of Green and Green with a comtempory cornice. No real style but it seems to work. Let me know your thoughts about the design. I’m working form my own sketches so let me know if you would like a copy and I’ll email them to you.
Thanks for visiting our website and please leave a comment. God Bless!
